上海11选5开奖结果

Injection molding machine barrel screw design requirements

Updated:03-07-2018
Summary:

Injection molding machine barrel screw design principle […]

Injection molding machine barrel screw design principle:

The main part of the pin screw is a conventional screw which can be placed in the groove of the melting section or the metering section of the screw or the smooth cylindrical surface without the groove at the end of the metering section。 The pins are arranged in a certain arrangement, and the density can vary from one to another。 The cylindrical pin is formed by fitting the pin into the hole of the screw; the square or diamond pin is formed by milling the pin directly on the screw。

If the pins are arranged in the melting zone, the pin can break the solid bed, destroy the two-phase flow, stir the solid and liquid phases together, and increase the contact area between the final dissolved solid phase fragments and the contained materials, and promote Melt. If the pin is placed in the melt transfer zone, its primary function is to split the flow, increase the interface, change the direction of the flow, and rearrange the flow. Dividing and converging multiple times, changing the flow direction to homogenize the melt composition and temperature.

The mixing section is an inwardly slotted structure disposed at the end of the ordinary screw homogenization section, and the outer diameter is equal to the outer diameter of the screw. The grooves are divided into groups, each of which is a confluence area of ​​materials. The material is divided by the groove, merged into the confluence area, and then divided and merged. The principle is similar to the pin type.

The separation type screw is characterized in that in addition to the original one screw thread (called the main screw), a thread (called an additional thread) is attached to the melting section, and the outer diameter is slightly smaller than the outer diameter of the main thread, and the main and auxiliary lines are The lead is different from the end of the feed section (and here associated with the feed section), after a few threads, gradually intersects the main thread of the homogenization section.

The screw groove depth and thread lead of the screw are gradually changed from the beginning of the feeding section to the end of the homogenization. The thread lead is gradually narrowed from the width, and the depth of the groove is gradually shallowened from the depth to maximize the compression of the material.

悠洋棋牌APP下载 上海11选5走势图 悠洋棋牌APP下载 多彩彩票平台 上海11选5走势图 上海11选5 悠洋棋牌 上海11选5分布走势图 上海11选5 上海11选5走势图